-
OUT OF STOCK
- Comes with two barrel and screw sizes: 22mm and 36mm
-
OUT OF STOCK
- Min. Mold Thickness: 5.91���
- Max Mold Thickness: 17.72���
- Max Ejector Stroke: 3.94���
- L/D Ratio: 10/1
- Screw Diameter: 28 mm
- Press stroke 14.17 inches
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 15.7"
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 18.7"
-
OUT OF STOCK
- Clamp Stroke: 23.62"
- Min Mold Height: 9.84"
- KO Pattern: 7: Vertical & Horizontal 4" x 16" V
- Ejection Stroke: 7.09"
- Screw Size: 40 mm
-
OUT OF STOCK
- Min / Max Mold Height: 9.84" / 18"
-
OUT OF STOCK
- Min / Max Mold Height: 9.84" / 18"
-
OUT OF STOCK
- Min / Max Mold Height: 11.5" / 30.5"
-
OUT OF STOCK
- Ejector Stroke: 2.8"
-
OUT OF STOCK
- Min / Max Mold Height: 5.91" / 16.93"
- Max Ejector Stroke: 3.15"
- Screw Size: 32 mm
-
OUT OF STOCK
Mold blow circuit At least 1 valve gate circuit -
OUT OF STOCK
Includes: Novatec Desiccant Dryer MD-50 with 200 lb. hopper, Aquatherm Mold Temp controller by Thermocare, Temptec 4 ton air cooled chiller,14 x 16 MUD die base with inserts (2��� aluminum B side plate, 1��� aluminum A side plate) -
OUT OF STOCK
Secondary equipment available for additional cost: Dryer hopper loader Thermolators MoldMaster temp control unit -
OUT OF STOCK
New Screw and Barrel Star Robot -
OUT OF STOCK
New Screw and Barrel -
Max daylight 33.46" Max injection PSI 34806 Mold height 5.91" -
- Dims: 164” x 39” x 65” @ 9,500 lbs.
- Inj. Unit capabilities with Barrel/ Screw change *
- Roboshot 110 ton options: 0.37 , 0.63 , 0.78 , 0.95 , 1.68 , 1.95 , 3.42 , 4.87 , 6.07
-
OUT OF STOCK
Screw Diameter: 40mm -
OUT OF STOCK
Tiebarless
Low Hours
Enlarged mould fixing platen: 29.13" x 26.77" -
OUT OF STOCK
SPI Interface
2008 Wittmann Sprue Picker Model: MTR-702
New screw and barrel 2005 -
OUT OF STOCK
Min Daylight: 7.9" Ejector Stroke: 2.7" Screw Diameter: 45mm
-
OUT OF STOCK
Yushin RA II-250 Robot available -
OUT OF STOCK
- Barrel Condition: Good
- Clamp Stroke: 20"
- Screw Diameter: 1.42"
- Heating Zones: 1 Nozzle / 3 Barrel
- Screw Condition: Good
-
OUT OF STOCK
- Carbide Barrel, CPM9V Barrier Screw
-
OUT OF STOCK
- Screw Diameter: 45 mm
- Min Mold Thickness: 6.6"
- Clamp Stroke: 15.7"
- Mold Open Force: 7 Tons
- Ejector Stroke: 3.3"
-
OUT OF STOCK
Includes: Yushin robot and spare screw for both barrels -
OUT OF STOCK
Includes new set of tie bars, extra screw and spare electrical boards -
OUT OF STOCK
New check ring 2016 Ejector stroke 3" Air blow 1
