-
OUT OF STOCK
- Minimum Daylight: 5.9"
- Screw Diameter: 30 mm
- X MELT High Speed Filling Equipment
- Full Load Amps: 85 amps
-
OUT OF STOCK
8 Mold Heater Zone
-
OUT OF STOCK
Remak Robot Screw with vented barrel, electric screw drive Baumuller Bum64, 5 Cores, 6 cascade control hydraulic with 2 position valves, 4-10 out water manifold, 1 slide monitoring input, 8 mold heaters -
OUT OF STOCK
- Remak Robot
- Screw with vented barrel
- Electric screw drive Baumuller Bum64
- 5 Cores
- 6 cascade control hydraulic with 2 position valves
- 4-10 out water manifold
- 1 slide monitoring input
- 8 mold heaters
- Screw Diameter: 95 mm
-
OUT OF STOCK
Min/Max Shut Height: 13.8"/41.3"
Clamp Stroke: 46.25"
Ejector Stroke: 9.8"
Screw Diameter: (A) 60mm (B) 50mm
L/D Ratio: (A) 23.6:1 (B) 24.3:1
Max Plastic psi: (A) 29841 (B) 30668 -
OUT OF STOCK
- Min shut height: 13.8"
- Max. shut height: 41.3"
- Clamp Stroke: 46.25"
- Ejector Stroke: 9.8"
- L/D Ratio: A23:6:1 B-24:3:1
- Max plastic psi: A-29841 B-30668
- Full Load Amps: 700A main breaker
- At Additional Cost: FANUC R-2000iA/165F RJ3iB
-
OUT OF STOCK
Includes: New hardened screw & tip Spare parts available Low hours -
OUT OF STOCK
CC-100 EL A03 Vertical Clamp/ Vertical Injection Light Curtains 2 Position Rotary Table -
OUT OF STOCK
Clamp Stroke: 61.94"
Screw Diameter: 135 mm
L/D Ratio: 25:1
Max PSI: 30,500
Pneumatic circuits
2 poke bar/6 air valve
Core circuits Hyd.
4 core/ 1 machine ejector -
OUT OF STOCK
Clamp Stroke: 61.94"
Screw Diameter: 135mm
L/D Ratio: 25:1
Max PSI: 30,500 -
OUT OF STOCK
45 mm hardened S/B
Ejector stroke: 5.9"
Opening stroke: 19.69"
Mold height min: 9.84" -
Max daylight 33.46" Max injection PSI 34806 Mold height 5.91" -
OUT OF STOCK
Retractable tiebar
Robot Interface
4 Corepulls and 2 Airblows
RJG Cavity Pressure Control -
OUT OF STOCK
- Screw Diameter: 130 mm
- Min. Mold Thickness: 19.7���
- Max. Mold Thickness: 51.2���
-
OUT OF STOCK
Tiebarless
Low Hours
Enlarged mould fixing platen: 29.13" x 26.77" -
3 sets of core switches hours 56,587 B/S condition: excellent -
OUT OF STOCK
Max mold thickness: 17.72"
Min mold thickness: 7.87" -
OUT OF STOCK
Low hours
Upgrades include: new pumps; screw and tip assembly -
OUT OF STOCK
Low hours -
OUT OF STOCK
- Knockout Stroke: 7.38���
- Screw Size: 32mm
- Upgraded Controller
-
OUT OF STOCK
- Mold Size: 9.8" x 19.6"
- Max Pressure: 24,245 psi
- Screw Diameter: 50mm - 36E
-
OUT OF STOCK
Screw Size: 50mm
