-
OUT OF STOCK
Cracked Clamp Housing Coming out of a Class 100,000 Medical Clean Room -
OUT OF STOCK
Includes: Mac Conveyor, Sterlco Water Circulator, Bunting Hopper MAgnet Coming out of a Class 100,000 Medical Clean Room
-
OUT OF STOCK
Includes: Mac Conveyor, Bunting Hopper Magnet, Delta Therm Water Circulator Coming out of a Class 100,000 Medical Clean Room
-
OUT OF STOCK
Includes: Mac Conveyor, Bunting Hopper Magnet Coming out of a Class 100,000 Medical Clean Room
-
OUT OF STOCK
Includes: Mac Conveyor, Bunting Hopper Magnet Coming out of a Class 100,000 Medical Clean Room
-
OUT OF STOCK
- Yushin HOP II Picker
- MAC Conveyor
- Delta Therm Water Circulator
- Bunting Hopper Magnet
- 56mm GP Screw
- Matsui Blender
- Coming out of Class 100,000 Medical Clean Room
-
OUT OF STOCK
Includes: Mac Conveyor, Sterlco Water Circulator, Bunting Hopper MAgnet Coming out of a Class 100,000 Medical Clean Room
-
OUT OF STOCK
- Barrel Size: 70 mm
- Maximum Injection: 22,582 PSI
- Max Injection Velocity: 26.1 in3/s
- Min / Max Stack: 11.8" / 34"
- Oil Capacity: 170 gallons
- Clamp Stroke: 27.6"
- Ejector Stroke: 9.5"
- Valve Gate: Yes
-
OUT OF STOCK
- Clamp Weight: 57,000 lbs.
- Injection Unit Weight: 20,000 lbs
- Screw Diameter: 90 mm
- Screw L/D: 24:1
- Minimum Die Height: 17.72"
- Platen Bolt Pattern: Metric
- Knockout: SPI STD. (2x8")(3x14")
- Plasticizing Rate: 578 kg/hr
-
OUT OF STOCK
- Screw Diameter: 90 mm
- Screw L/D: 24:1
- Tie Bar Diagonal: 58.97���
- Min Die Height: 19.69���
- Platen Bolt Pattern: SPI STD.
- Knockout: SPI STD. (2x8)(3x14)
-
OUT OF STOCK
- Ejector Stroke: 5.8���
- Number of Cores: 1
-
OUT OF STOCK
- Number of Cores: 1
- Ejector Stroke: 12.8���
-
OUT OF STOCK
- Barrel Condition: Good
- Clamp Stroke: 20"
- Screw Diameter: 1.42"
- Heating Zones: 1 Nozzle / 3 Barrel
- Screw Condition: Good
-
OUT OF STOCK
- Min/Max Mold Height: 7.9��� / 25.6���
- Full Load Amps: 92
-
OUT OF STOCK
- Min/Max Mold Height: 7.9��� / 25.6���
- Full Load Amps: 92
-
OUT OF STOCK
- Includes: Mounting Pads, Air Blow
-
OUT OF STOCK
- Cycle Times: 20 Seconds
- Full Load Amps: 156.7
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 18.7"
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 15.7"
-
OUT OF STOCK
- Rotary Table: 98.43" - 2 Station
- Total Mold Height: 29.76"
- Minimum Daylight: 23.62"
- Opening Stroke: 15.75"
-
OUT OF STOCK
- Rotary Table: 98.43" - 2 Station
- Total Mold Height: 29.76"
- Minimum Daylight: 23.62"
- Opening Stroke: 15.75"
-
OUT OF STOCK
- Barrel and Screw Condition: Good
-
OUT OF STOCK
- Hours: 8366; Low Hours
- New Hardened Barrel and Screw
- Screw Diameter: 32 mm
-
OUT OF STOCK
- Screw Diameter: 130 mm
- Min. Mold Thickness: 19.7���
- Max. Mold Thickness: 51.2���
-
OUT OF STOCK
Robot Included -
OUT OF STOCK
Loader System: 12VDC pro rate, single hoppers, single inlets L/D Ratio: 22.9:1 Max Inj Hyd PSI: 2175 psi Max Plastic PSI: 26750 psi Max Inj. Stroke: 31.5��� Intensification Ratio: 12.3:1
-
OUT OF STOCK
- Screw Torque: 15,900 / 23,900 ft-lbs
- Min Daylight: 7.1
- Max Injection Speed: 37.7 in/sec
- Hot Runner Controller: No
- Robot Connection Type: SPI
- Hydraulic Core pull Func.: 2
- Injection Unit Bolted to Clamp Unit: No
- Location of Core pull Functions: Movable
- Tie Bar Diameter: 4.92���
- Core pull Size: 3/4���
- Min / Max Shut-height: 7.1��� / 44.7���
- # of H2O Manifolds Available: 2
- Platen Mounting Bolt Pattern: SPI
- Location of ea. Manifold: Floor / Non Op
- Shut off Nozzle: Unavailable
- # of Outlets per Manifold: 12 / 20
- Screw Diameter: 2.36���
- Fitting Size Per Outlet: 1/2���
- Intensification Ratio: 14.4 : 01
-
OUT OF STOCK
- Min Daylight: 19.69���
- Min Mold: 5.98���
- Max Mold: 21.96���
- Screw Diameter: 50 mm
- Magnet System: Tecnomagnete Platen
-
OUT OF STOCK
- Min Daylight: 11.8"
- Cycle Times: 70 sec.
- Max Mold Height: 39.4���
- Screw Diameter: 110 mm
- Injection Pressure: 22,749 PSI
- Injection Rate: 35.8 in3/sec
- Min Mold Height: 11.8���
- Screw L/D Ratio: 20:1
- Clamp Stroke: 39.4���
-
OUT OF STOCK
Clamp Style: Vertical Rotary Rotary Stations: 2 Table Size: 77" Screw Diameter: 55 mm Max Injection Pressure: 2500 psi Injection Rate: 13.68 in3/sec Barrel/Screw Condition: Good Screw Stroke: 9.84"
-
OUT OF STOCK
Table Size: 77" Screw Diameter: 55mm
-
OUT OF STOCK
- Moveable and stationary hydraulic cores
- Air circuits
-
OUT OF STOCK
- Moveable and stationary hydraulic cores
- Air circuits
-
OUT OF STOCK
- Includes Wittmann Robot
- Screw Diameter: 18 mm
- Barrel / Screw Condition: Excellent
-
OUT OF STOCK
Max Ejection Stroke: 5.1"
-
OUT OF STOCK
Turntable diameter: 63 Die plate Dimensions: 33.5 x 26.4 Clamping Stroke: 14.6 Minimum Mold Thickness: 13.8 Max Opening Distance: 720 mm Ejector Stroke: 3.1 Heating Bands Power: 11.3 Kw
