- Screw Size: 63mm
-
OUT OF STOCK
-
OUT OF STOCK
- Chrome screw, bi-metallic barrel and free flow check ring
- Low Hours
-
OUT OF STOCK
- 2 Platen clamp
- Clamp & injection automatic lubricating system
Includes:
- Thoreson McCosh Dryer System, Thoreson McCosh Feed Hopper,�� 2005 Star Robot, Model: TW-2000FMIII-3, Advantage Chiller, All Related Catwalks, Stairs & Platforms
- Trim Cell Equipped w/ The Following:
- 1999 ABB Model 2400 Robot w/IRB2400-M98A Controls and Teach Pendant, TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer with Drive, Related Cage And Lockout Ststem
- Mold Change System: 2003 Pascel Mold Change System that can Service Two Machines, Model: QMC2-30-GK M201A-01403 With Allen Bradley PLC Controls and Mold Clamping System
-
OUT OF STOCK
- 2 Platen Clamp
- Clamp and injection unit automatic lubrication systems
- 2006 Star Robot, Model: TW-2000FMIII-3
- Includes:
- Novatech dryer, Conair GB series 2 chamber gravimetric batch blender feed hopper system, Advantage Intellitemp T-1000 Model, TDM-9120B chiller, all related catwalks, stairs and platforms
- Trim Cell Equipped w/ The Following:
- 2000 ABB Model 2400 Robot with IRB2400-M98A Controls
- Teach Pendant TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer
-
OUT OF STOCK
- Dual Corepull
- SPI Robot Interface
- RJG Process Monitoring System
-
OUT OF STOCK
- Min. Shut height: 16.5���
- Max. Shut height: 55.1���
- 2-Platen
- 24 zone Hot Runner
- No Valve Gates
-
OUT OF STOCK
- VNII EA 150SL Yushin Robot
-
OUT OF STOCK
- New Barrel and Screw Xaloy 802
-
OUT OF STOCK
- Cycle Times: 20 Seconds
- Full Load Amps: 156.7
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 18.7"
-
OUT OF STOCK
- Screw Diameter: 40 mm
- Minimum Mold Height: 5.9"
- Maximum Mold Height: 15.7"
-
OUT OF STOCK
- Rotary Table: 98.43" - 2 Station
- Total Mold Height: 29.76"
- Minimum Daylight: 23.62"
- Opening Stroke: 15.75"
-
OUT OF STOCK
- Rotary Table: 98.43" - 2 Station
- Total Mold Height: 29.76"
- Minimum Daylight: 23.62"
- Opening Stroke: 15.75"
-
OUT OF STOCK
- Barrel and Screw Condition: Good
-
OUT OF STOCK
- Hours: 8366; Low Hours
- New Hardened Barrel and Screw
- Screw Diameter: 32 mm
-
OUT OF STOCK
- Remak Robot
- Screw with vented barrel
- Electric screw drive Baumuller Bum64
- 5 Cores
- 6 cascade control hydraulic with 2 position valves
- 4-10 out water manifold
- 1 slide monitoring input
- 8 mold heaters
- Screw Diameter: 95 mm
-
OUT OF STOCK
- Moveable and stationary hydraulic cores
- Air circuits
-
OUT OF STOCK
Robot Included -
OUT OF STOCK
Loader System: 12VDC pro rate, single hoppers, single inlets L/D Ratio: 22.9:1 Max Inj Hyd PSI: 2175 psi Max Plastic PSI: 26750 psi Max Inj. Stroke: 31.5��� Intensification Ratio: 12.3:1
-
OUT OF STOCK
- C560M Injection Unit Size
-
OUT OF STOCK
- Low Hours
- 2 position rotary table
- 55mm screw
- Mold heat zone
- Center hook up for water and hydraulics
-
OUT OF STOCK
Air Blow -
OUT OF STOCK
- Full Load Amps: 73
-
OUT OF STOCK
- Full Load Amps: 73
-
OUT OF STOCK
- # of Nozzle Locations: 11 Rows x 18 Columns
- Tie Bar Diameter: 12"
- 100 lb Shot
-
OUT OF STOCK
Machine includes robot and conveyor
-
OUT OF STOCK
Machine includes robot and conveyor Min. daylight is 7.1 inches
-
OUT OF STOCK
Photos coming soon!
-
OUT OF STOCK
Min. daylight 11.8 inches
-
OUT OF STOCK
Min. daylight 9.84
-
OUT OF STOCK
Min. Mold with spacer 6.1" Min. Mold without spacer: 12.2" Clamp stroke 29.9" Ejector stroke 5.8"
-
OUT OF STOCK
Excellent S/B rebuilt 2009 and barrel lined
New Hydraulic pumps, heater bands, clamp spacer and leveling pads
Wittmann Robot W322
Min. mold with spacer 11.81
Min. mold without spacer 23.62 -
OUT OF STOCK
100mm GP screw 17500 injection pressure
-
OUT OF STOCK
2-shot machine 8.25 -- 4.97 oz.
L Configuration
Min. daylight: 7.87"
Clamp stroke: 20.08" -
OUT OF STOCK
2- shot machine: 6.8/ 6.8 oz. Min. daylight: 9.84"
-
OUT OF STOCK
Upgraded pumps
Cycle time 14 sec.
FLA 226
Mold shut height 21.25" - 44.68" -
OUT OF STOCK
Double core pulls font and back 500 lb hopper Accumulator Vacuum pump
-
OUT OF STOCK
Clamp style: Vertical Fixed -
OUT OF STOCK
Ejector stroke: 6"
Clamp max stroke: 44"
20,300 psi
Injection stroke: 18.5"
Screw diameter: 4.53" -
OUT OF STOCK
Clamp stroke: 48.03"
Screw diameter: 125mm
Injection pressure: 21,268psi -
OUT OF STOCK
Clamp stroke: 48.03"
-
OUT OF STOCK
45 mm hardened S/B
Ejector stroke: 5.9"
Opening stroke: 19.69"
Mold height min: 9.84" -
OUT OF STOCK
Clamp stroke: 27.56"
Min. closed daylight 11.81"
Sprue picker* optional -
OUT OF STOCK
Vertical Rotary
Rotary table dia: 58.00"
Shuttle stroke: 33.50"
Clamp stroke: 15.00"
Min. mold size: 10.00"
Max. mold size: 16"x 20" -
OUT OF STOCK
high speed accumulators
60mm screw
stack mold capability
valve gate program upgrade -
OUT OF STOCK
upgraded for intrusion in 2006
mold capacity: 32" x 46"
