Injection Molding Machines

Tiebarless
SPI Interface
Microplas/ Microflow Package
Closed loop feed throa temp controller
Air blow-off circuit

• Min Mold Height: 29.53"
• Max Mold Height: 43.30"
• Includes Transformer to Convert from 380 Power

2 Platen

New screw and pump motor installed 2014

• Low Hours

Spacer Thickness: 23.2" x 14"
Max Daylight with spacer: 77.6"
Screw Diameter: 5.51" / 140mm
Min Mold Height: 17.3"
Stroke: 60.2"
Ejectors A, B
Cores A, B, C, D

90 Amps

1800 US Tons No valve gates Hot Runners - 24 zone 4 Cores on stationary platen, 2 cores on moving

SPI Interface
Mold Close and ejector forward interlock

• Low Hours
• 2 position rotary table
• 55mm screw
• Mold heat zone
• Center hook up for water and hydraulics

• 3- stage air eject
• Sprue Break
• Eject Retract Verification

• Min Daylight: 5.91���

Dual corepull

• Min. Shut height: 16.5���
• Max. Shut height: 55.1���
• 2-Platen
• 24 zone Hot Runner
• No Valve Gates

• Min/Max Mold Height: 15.7���/ 44.1���
• Ejector Stroke: 9.84���

Hydro Mechanical Clamp
High abrasion barrel w/ CPM 9V screw and screw tip
Hours: 29,424

• Dual Corepull
• SPI Robot Interface
• RJG Process Monitoring System

• Screw Diameter: 25 mm
• Min Daylight: 8.26 "

• Rebuilt in 1996
• Robot Available

Star Robot Available model: TW-1500 FF3
Valve Gate System
Cavity transfer
New barrel and screw

Includes Chiller and Dryer  

2590 US Tons Clamp Stroke: 129.25" Screw Diameter: 200mm L/D Ratio: 21.7:1 Max PSI: 23,206 Pneumatic circuits 2 poke bar / 5 air valve Core Circuits Hyd., 5 core / 1 machine ejector

• Comes with two barrel and screw sizes: 22mm and 36mm

Max Mold Height: 37.4"
2 hydraulic core pull circuits, air blast circuit, valve gate circuit,
2001 Ranger Robot Model: RT-70053

• One Core on the Moving

Max Mold: 53.1" x 41.33"
Mold Thickness: 19.68"

Min Daylight: 7.87"

Clamp Stroke: 88.6"
Ejector Stroke: 11.8"
Max plastic psi: 27,496
Screw Diameter: 125mm

Min/ Max Shut Height: 9.8" /33.4"
Clamp Stroke: 34.4"
Ejector Stroke: 7.9"
Screw Diameter: (A) 50mm (B) 42mm
L/D Ratio: (A) 25.0:1 (B) 24.4:1
Max plastic psi: (A)30675 (B) 31459

Clamp Stroke: 112.5"
Ejector Stroke: 13.8"
Screw Diameter: 140mm
L/D Ratio: 22.9:1
Max PSI: 26750

2590 US Tons
Clamp Stroke: 129.25"
Screw Diameter: 200mm
L/D Ratio: 21.7:1
Max PSI: 23,206
Pneumatic circuits
2 poke bar/ 5 air valve
Core circuits Hyd.
5 core/ 1 machine ejector

Clamp Stroke: 61.94"
Screw Diameter: 135 mm
L/D Ratio: 25:1
Max PSI: 30,500
Pneumatic circuits
2 poke bar/6 air valve
Core circuits Hyd.
4 core/ 1 machine ejector

Robot Interface
Min/Max Mold Height: 7.9"/25.6"

Robot Interface
Min/Max Mold Height: 7.9" x 25.6"

Table set up for 2/3 station operation

Electric Screw drive
Robot interface
Low hours

60mm Screw Diameter

Screw Size: 30mm

Screw Size: 40mm