-
OUT OF STOCK
Includes Robot, quick mold changer, dryer system, and all platforms -
OUT OF STOCK
- Injection unit rebuilt
-
Converted to 3500 ton Control upgrade to VDU2 145 mm Screw High Pressure Injection Unit -
OUT OF STOCK
- Screw Diameter: 5.25"
- Clamp Stroke: 105"
- Robot Model: R-2000iA/165F
- Technomagnete Electro-Magnetic Clamping System
- Conveyor & Safety Fence
- Thermolators (Qty 4)
- Min / Max Mold Height: 36.35" / 76.47"
-
OUT OF STOCK
- 2 Platen clamp
- Clamp & injection automatic lubricating system
Includes:
- Thoreson McCosh Dryer System, Thoreson McCosh Feed Hopper,�� 2005 Star Robot, Model: TW-2000FMIII-3, Advantage Chiller, All Related Catwalks, Stairs & Platforms
- Trim Cell Equipped w/ The Following:
- 1999 ABB Model 2400 Robot w/IRB2400-M98A Controls and Teach Pendant, TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer with Drive, Related Cage And Lockout Ststem
- Mold Change System: 2003 Pascel Mold Change System that can Service Two Machines, Model: QMC2-30-GK M201A-01403 With Allen Bradley PLC Controls and Mold Clamping System
-
OUT OF STOCK
- 2 Platen Clamp
- Clamp and injection unit automatic lubrication systems
- 2006 Star Robot, Model: TW-2000FMIII-3
- Includes:
- Novatech dryer, Conair GB series 2 chamber gravimetric batch blender feed hopper system, Advantage Intellitemp T-1000 Model, TDM-9120B chiller, all related catwalks, stairs and platforms
- Trim Cell Equipped w/ The Following:
- 2000 ABB Model 2400 Robot with IRB2400-M98A Controls
- Teach Pendant TEC 36��� x Approx. 10��� Flat Discharge Belt Conveyer
-
OUT OF STOCK
Screw Diameter: 140mm
Min Daylight: 23.5"
Max Screw Speed: 90RPM
QMC 121 Magnetic System
SPI Interface Wired for Robot
4 Hydraulic Core Functions
Set up to run GAS process
Auto Door and Moving Steps to Run Process By Hand -
OUT OF STOCK
Staubli Magnetic Platen Low Hours 2007 Fanuc R-2000IA/125L Number of cores: 6 Retractable column system Screw Diameter: 6.88" -
OUT OF STOCK
- New Ram Seals
- New controller (like Mosaic)
-
OUT OF STOCK
Includes: Fanuc Robot, pedestal, pendant & 30 zone hot runner Retractable Tie-bars & Magnetic Platens Cores: 3 Movable / 2 Stationary Ceramic Heater Bands Hydraulic Mold Gates (8) & Power Pivot
-
OUT OF STOCK
Includes: Fanuc Robot, pedestal, pendant & 30 zone hot runner Retractable Tie bars & Magnetic Platens Cores: 3 Movable / 2 Stationary Ceramic Heater Bands Hydraulic Mold Gates (8) & Power Pivot
-
OUT OF STOCK
- Cores: 2
- Air Blows: 4
- Robot Available at Additional Cost
-
OUT OF STOCK
- Retractable tie bars
- 12 built in valve gate controls
-
OUT OF STOCK
2004 Yushin Robot Model: RAII-a-2500 SLLL-30
Screw Size: 5.25"
Clamp Stroke: 80.50 -
OUT OF STOCK
Only 7.500 hours!
-
OUT OF STOCK
2590 US tons -
OUT OF STOCK
2590 US Tons Clamp Stroke: 129.25" Screw Diameter: 200mm L/D Ratio: 21.7:1 Max PSI: 23,206 Pneumatic circuits 2 poke bar / 5 air valve Core Circuits Hyd., 5 core / 1 machine ejector -
OUT OF STOCK
2590 US Tons
Clamp Stroke: 129.25"
Screw Diameter: 200mm
L/D Ratio: 21.7:1
Max PSI: 23,206
Pneumatic circuits
2 poke bar/ 5 air valve
Core circuits Hyd.
5 core/ 1 machine ejector -
OUT OF STOCK
Min shut height: 39.37"
Max shut height: 108.27" -
OUT OF STOCK
2 Platen -
OUT OF STOCK
Ejector Stroke 15.7" Clamo Stroke 104.3" Air Eject -
OUT OF STOCK
High Base Machine 160mm Screw Upgrades: New (2017) injection end, barrel, screw, new injection cylinder casting, new extruder piston motor. -
OUT OF STOCK
- Min / Max Shut Height: 21.6��� / 70.9���
- Clamp Stroke: 120.1���
- Ejector Stroke: 15.75���
- Screw Diameter: 140 mm
- Hyd. Oil Capacity: 700 gal
- L/D Ratio: 22.9:1
- Max Injection Hyd PSI: 2175 psi
-
OUT OF STOCK
- Clamp System: RAM Cylinder
- Controller Upgraded in 2014
- Injection Stroke: 21"
- Barrel L/D Ration: 20/1
- Screw Diameter: 5.32"
-
OUT OF STOCK
2007 Wittmann Robot Model: W653 -
OUT OF STOCK
Tandem Machine Low hours
