-
Ejector Stroke 6" Clamp Stroke 40" Air Eject -
OUT OF STOCK
Min. Daylight 13.8 -
OUT OF STOCK
- Screw Diameter: 85 mm Ejector Stroke: 150 mm
- Clamp Stroke: 34.4"
- Max Injection Stroke: 16.2"
- Min / Max Shut Height: 9.8" / 33.5"
-
OUT OF STOCK
- Min shut height: 9.8"
- Max shut height: 33.4"
- Clamp Stroke: 34.4"
- Ejector Stroke: 7.9"
- L/D Ratio: A-25:.0:1 B- 24.4:1
- Max Plastic PSI: A-30675 B-31459
- FLA 600A main breaker
-
OUT OF STOCK
Min/ Max Shut Height: 9.8" /33.4"
Clamp Stroke: 34.4"
Ejector Stroke: 7.9"
Screw Diameter: (A) 50mm (B) 42mm
L/D Ratio: (A) 25.0:1 (B) 24.4:1
Max plastic psi: (A)30675 (B) 31459 -
OUT OF STOCK
Min/Max Mold Height: 11.81" x 34" Clamp Stroke: 27.56" Ejector Stroke: 9.45" -
OUT OF STOCK
Screw Diameter: 90mm
Ejector stroke: 5.8"
Clamp stroke: 40.2" -
OUT OF STOCK
Screw diameter: 90 mm
Ejector stroke: 5.8"
Clamp stroke: 40.2" -
OUT OF STOCK
Screw diameter: 90 mm
Ejector stroke: 5.8"
Clamp stroke: 40.2" -
OUT OF STOCK
- Min Daylight: 8.26"
- Full Load Amps: 75
-
OUT OF STOCK
- Minimum Daylight: 17.72"
-
OUT OF STOCK
Temp Tek chiller included -
OUT OF STOCK
- Full Load Amps: 34
- Motor Rebuilt in 2015
- Floppy Disc Drive Updated to USB in 2014
- DME�� MUD ���U��� style frame Model 11/11
-
OUT OF STOCK
- Screw Torque: 15,900 / 23,900 ft-lbs
- Min Daylight: 7.1
- Max Injection Speed: 37.7 in/sec
- Hot Runner Controller: No
- Robot Connection Type: SPI
- Hydraulic Core pull Func.: 2
- Injection Unit Bolted to Clamp Unit: No
- Location of Core pull Functions: Movable
- Tie Bar Diameter: 4.92���
- Core pull Size: 3/4���
- Min / Max Shut-height: 7.1��� / 44.7���
- # of H2O Manifolds Available: 2
- Platen Mounting Bolt Pattern: SPI
- Location of ea. Manifold: Floor / Non Op
- Shut off Nozzle: Unavailable
- # of Outlets per Manifold: 12 / 20
- Screw Diameter: 2.36���
- Fitting Size Per Outlet: 1/2���
- Intensification Ratio: 14.4 : 01
-
OUT OF STOCK
Hydro Mechanical Clamp
High abrasion barrel w/ CPM 9V screw and screw tip
Hours: 29,424 -
OUT OF STOCK
New Screw & Barrel and Ball Check
-
OUT OF STOCK
Screw diameter: 65mm
Ejector stroke: 5.5"
Clamp stroke: 22.8" -
OUT OF STOCK
Min. Mold Height: 9.65"
Max. Mold Height: 29.55"
Screw Diameter: 50mm -
OUT OF STOCK
Low Hours
Medical Machine
FLA 30 -
OUT OF STOCK
Min. daylight: 10"
FLA 70
Dry cycle: 2 sec -
OUT OF STOCK
Recent Upgrades: Picker Robot
Min Daylight: 7.87" -
OUT OF STOCK
Dual Shot
Min Daylight: 9.84"
Min Mold Thickness: 9.8"
45mm Screw Both Barrels -
OUT OF STOCK
Min. daylight 9.84
-
OUT OF STOCK
Clamp Stroke: 112.5"
Ejector Stroke: 13.8"
Screw Diameter: 140mm
L/D Ratio: 22.9:1
Max PSI: 26750 -
OUT OF STOCK
Low hours Clamp Stroke: 24.8" -
OUT OF STOCK
New barrel & screw New pumps New traverse cylinder New ram seal
-
OUT OF STOCK
Loader System: 12VDC pro rate, single hoppers, single inlets L/D Ratio: 22.9:1 Max Inj Hyd PSI: 2175 psi Max Plastic PSI: 26750 psi Max Inj. Stroke: 31.5��� Intensification Ratio: 12.3:1
-
OUT OF STOCK
- C560M Injection Unit Size
-
OUT OF STOCK
- Screw Diameter: 45 mm
- Ejector Stroke: 4.72���
- Min/Max Mold Height: 7.87��� - 19.68���
- Injection Unit Size: C560M
-
52 amps Max Daylight 35" -
OUT OF STOCK
Screw diameter 50"
-
OUT OF STOCK
1800 US Tons No valve gates Hot Runners - 24 zone 4 Cores on stationary platen, 2 cores on moving -
OUT OF STOCK
New screw & barrel and check
-
OUT OF STOCK
- Knockout Stroke: 7.38���
- Screw Size: 32mm
-
OUT OF STOCK
- Knockout Stroke: 7.38���
- Screw Size: 32mm
-
OUT OF STOCK
Knockout Stroke 7.36 inches Screw Size 32 mm
-
OUT OF STOCK
- 2 Platen Machine
- 3 Core-pulls, Robot Interface
- Screw Size: 135mm
-
Ejector Stroke 10.8" Clamo Stroke 74.8" -
OUT OF STOCK
- Min / Max Mold Height: 5.91" / 16.93"
- Max Ejector Stroke: 3.15"
- Screw Size: 32 mm
-
OUT OF STOCK
New Screw and Barrel -
OUT OF STOCK
Wired for hydraulic power pac for cores
Shot: 1.67 and 2.27 oz. -
OUT OF STOCK
New Screw and Barrel
Screw Size: 105mm
Min. Daylight: 19.69" -
OUT OF STOCK
Includes Robot 6 Cascades, 4-10 out water manifold and 32 mold heater zone 130mm Screw 4 Cores & 1 Ejector -
OUT OF STOCK
- Min Mold Height: 7.08"
- Max Mold Height: 24.8"
- Screw Diameter: 1.26"
- Yushin Robot Optional
-
OUT OF STOCK
Clamp Stroke: 69"
Min/Max Mold Height: 19.7"/43.3" -
OUT OF STOCK
Robot Interface
Hydraulic Mold Clamps
Dual Corepull
2 Platen -
OUT OF STOCK
New screw and pump motor installed 2014 -
OUT OF STOCK
- New Barrel and Screw (Cincinnati)
- Min Mold Thickness (spacer): 11.8"
- Min Mold Thickness (w/out spacer): 23.6"
- Max Daylight with spacer: 63.8"
-
OUT OF STOCK
3.3 oz horizontal 1.3 oz. vertical 2nd injection unit on top new screw and check ring 2019 -
OUT OF STOCK
- Min Daylight: 11.8"
- Cycle Times: 70 sec.
- Max Mold Height: 39.4���
- Screw Diameter: 110 mm
- Injection Pressure: 22,749 PSI
- Injection Rate: 35.8 in3/sec
- Min Mold Height: 11.8���
- Screw L/D Ratio: 20:1
- Clamp Stroke: 39.4���
-
OUT OF STOCK
robot available
-
OUT OF STOCK
Clamp Stroke: 47.24" Min/Max Mold Height: 15.75"/ 31.5" Screw diameter: 80mm -
OUT OF STOCK
US tons: 660 Clamp stroke: 38.4 Ejector stroke: 150mm Screw diameter: 100mm L/D Ratio: 24.2:1 Max Injection Stroke: 19.4 Min. shut-height: 9.8 Max shut-height: 37.4
