- Injection Unit: Horizontally Mounted
- Mold Thickness Min / Max: 13" / 21"
- Max Mold Space D x W: 16" x 20"
- SPI Interface
- Movable Automation
-
OUT OF STOCK
-
OUT OF STOCK
Includes: Magnetic platens, Conveyor, Catwalk, Platform and Robot -
OUT OF STOCK
Recent upgrades: Outlet for Sprue Picker -
- Dims: 164” x 39” x 65” @ 9,500 lbs.
- Inj. Unit capabilities with Barrel/ Screw change *
- Roboshot 110 ton options: 0.37 , 0.63 , 0.78 , 0.95 , 1.68 , 1.95 , 3.42 , 4.87 , 6.07
-
OUT OF STOCK
Max Stroke: 46.26" Min/Max Mold Shut Height: 13.78" / 41.34" Ejector Stroke: 9.843" 5 Mold Air Functions Accumulated Injection Speed Up Shut off Head High Speed Extruder -
** Magnetic Platens -
OUT OF STOCK
- Rotary Two Platen
- Two Color Shot
- Min / Max Die Height: 15.75" / 43.31"
- Clamp Stroke: 66.92"
- Motor: 125 HP
- 29" Between Injection Unit
-
OUT OF STOCK
Tiebarless
SPI Interface
Microplas/ Microflow Package
Closed loop feed throa temp controller
Air blow-off circuit -
OUT OF STOCK
Tiebarless
SPI Interface
Microplas/ Microflow Package
Closed loop feed throa temp controller
Air blow-off circuit -
OUT OF STOCK
- Low Hours
-
OUT OF STOCK
Screw Diameter: 140mm
Min Daylight: 23.5"
Max Screw Speed: 90RPM
QMC 121 Magnetic System
SPI Interface Wired for Robot
4 Hydraulic Core Functions
Set up to run GAS process
Auto Door and Moving Steps to Run Process By Hand -
OUT OF STOCK
Includes: Wittmann Robot Model: W721, 17 lbs payload Barrier Screw, Coining, Mold Guard Magnetic Platens -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Hydraulic and air valve/mold gates -
Airblows 2 Screw size 55mm Ejector Stroke 4.72" -
OUT OF STOCK
- Barrel and Screw Condition: Good
-
OUT OF STOCK
- 3- stage air eject
- Sprue Break
- Eject Retract Verification
-
OUT OF STOCK
Engel ERC Robot -
OUT OF STOCK
- Barrel & Screw Condition: Good
- Horizontal Injection
- 3 Station Rotary
- Clamp Stroke: 13.78"
- Ejector Stroke: 2.36"
- Min Mold Height: 11.81"
-
OUT OF STOCK
Hydraulic Toggle Clamp
Low Hours
Min Daylight: 9.84" -
OUT OF STOCK
- Mold Thickness Min. 25.2���
- Mold Thickness Max. 60.6���
- (2) cores (3) valve gates
-
OUT OF STOCK
Min Mold Height: 19.05"- 4 Core, 2 Ejectors
- Screw Diameter: 135 mm
- Min Daylight
- Without Spacer: 33.1"
- With Spacer: 27"
-
OUT OF STOCK
Min Mold Height: 19.05"- 4 Core, 2 Ejectors
- Screw Diameter: 135 mm
- Min Daylight
- Without Spacer: 33.1"
- With Spacer: 27"
-
95mm screw Robot interface -
OUT OF STOCK
Servo Equipped
-
OUT OF STOCK
Servo Equipped
-
OUT OF STOCK
Min Mold Thickness: 23.6" High Speed Package SPI Platens Mold cooling package Hot runner control for 6 zones 9 air blows Accumulators
-
OUT OF STOCK
Hylectric Machine
Clamp stroke: 72.8"
Ejector stroke: 9.84"
Screw diameter: 125mm
2 Core Functions on Moving Platen
2 Core Functions on Stationary Platen
Mold Cooling
PC Controller
Wittman Robot -
OUT OF STOCK
Clamp stroke: 72.8"
Ejector stroke: 9.84"
Screw diameter: 125mm
Wittman Robot -
OUT OF STOCK
Hylectric Machine
Clamp stroke: 72.8"
Ejector stroke: 9.84"
Screw diameter: 125mm
2 Core Functions on Moving Platen
2 Core Functions on Stationary Platen
Mold Cooling
PC Controller
Wittman Robot -
OUT OF STOCK
- Robot Payload: 23 lbs.
- 5 Cores
- Screw Diameter: 95 mm
- Includes Remak Robot
-
OUT OF STOCK
- New screw and barrel 2012
- Upgraded controller
-
OUT OF STOCK
- 29" Center to Center on Barrels
- Side by Side Barrels
- Upgrades: Rotary Table Bearing, Drivers, Screw Motors, Robot Servo Motors, Servo Valves for Clam Control
- Minimum Mold Thickness: 23.75"
-
OUT OF STOCK
- Valve Gate: Air
- Air Blow: 2 Stage
- Max Clamp Stroke: 43"
- Minimum Mold Thickness: 14.2"
- Ejector Stroke: 7"
- Tie Bar Diameter: 5.5"
- Screw L/D Ratio: 25:1
-
OUT OF STOCK
Robot available for additional cost. -
OUT OF STOCK
- Full Load Amps: 288
- Editable Core Pullers
- Air Valves
- Gas Injection
- Binary Mold I.D.
- Mold Rotate
- HKO Ejector: 7.87"
-
OUT OF STOCK
- Full Load Amps: 92
- Min / Max Mold Height: 7.9" / 25.6"
- Wide Platen
-
OUT OF STOCK
- Full Load Amps: 92
- Min / Max Mold Height: 7.9" / 25.6"
- Wide Platen
-
OUT OF STOCK
- Min/Max Mold Height: 7.9��� / 25.6���
- Full Load Amps: 92
-
OUT OF STOCK
- Min/Max Mold Height: 7.9��� / 25.6���
- Full Load Amps: 92
-
OUT OF STOCK
high speed accumulators
60mm screw
stack mold capability
valve gate program upgrade -
OUT OF STOCK
Star Robot Available additional cost New main hydraulic pump, 50mm barrel and posi-melt screw Max/Min Die Height: 47.2/ 13.8 -
OUT OF STOCK
Min. daylight: 11"
