- Min / Max Shut Height: 21.6��� / 70.9���
- Clamp Stroke: 120.1���
- Ejector Stroke: 15.75���
- Screw Diameter: 140 mm
- Hyd. Oil Capacity: 700 gal
- L/D Ratio: 22.9:1
- Max Injection Hyd PSI: 2175 psi
-
OUT OF STOCK
-
OUT OF STOCK
- Screw size: 50mm
-
OUT OF STOCK
Table Size: 77" Screw Diameter: 55mm
-
OUT OF STOCK
Ranger Robot: RT 300S3-IL
Co-injection
Gas assist -
OUT OF STOCK
2 Temptek Water Temp Controllers available -
OUT OF STOCK
- Cores: 2
- Air Blows: 4
- Robot Available at Additional Cost
-
OUT OF STOCK
- Retractable tie bars
- 12 built in valve gate controls
-
OUT OF STOCK
Low Hours -
- includes a set of magnetic platens and mold rollers
-
OUT OF STOCK
Screw size B 26mm -
OUT OF STOCK
2- shot machine
Min. daylight: 18.5" -
OUT OF STOCK
PET Machine Rotary - 4 faces of 96 cavities: 28.0 gr, 25.0 gr, 20.2 gr included -
OUT OF STOCK
80mm Screw Ejector Stroke 5.83 Min/Max Mold 7" / 27.5" -
OUT OF STOCK
- Screw Diameter: 25 mm
- Min Daylight: 8.26 "
-
OUT OF STOCK
Screw Diameter: 3.15"
Included additional pump and accumulator -
OUT OF STOCK
- New barrel and screw
-
OUT OF STOCK
Screw Diameter: 95mm
-
OUT OF STOCK
Min. Daylight: 12" -
OUT OF STOCK
Wittmann Robot Model: W641 CB -
OUT OF STOCK
Engel mold locking system on the platen
-
OUT OF STOCK
Min. daylight: 9.8"
-
OUT OF STOCK
- Full Load Amps: 73
-
OUT OF STOCK
- Hours: 8366; Low Hours
- New Hardened Barrel and Screw
- Screw Diameter: 32 mm
-
OUT OF STOCK
Clean room environment Also Available: Yushin 3-Axis Robot Year: 2000 Model: YAII-150S
-
OUT OF STOCK
- Clamp Stroke: 32"
- 100 HP Main Motor
-
OUT OF STOCK
Robot interface
2 corepull 3 airblow -
OUT OF STOCK
2011 Star Robot TW-1800VIH-480 with Valve Gate- Available. -
OUT OF STOCK
Retractable Tie Bar Screw Diameter 120mm Includes Milacron/Sepro Robot, 2014 Model SR4060S3 TRANS -
OUT OF STOCK
- Min Mold Height: 9.84"
- Max Mold Height: 22.04"
- Clamp Stroke: 19.69"
- KO Pattern: 7" Vertical & Horizontal 4" x 16" H
- Ejection Stroke: 6.3"
- Screw Diameter: 45 mm
-
OUT OF STOCK
- Low Hours
- Ejector plate + hydraulic ejector
- 6 mold nozzles
- 4 cores
- 4 mold cavity pressure transducers
- 65 lbs payload BOSCH controlled servo-robot
- Height of Center Mold: 70.87"
- Screw Diameter: 4.72"
-
OUT OF STOCK
Star Robot: Model TWS-1700 FEC
Hydraulic Mold Clamps
Valve Gate Controls -
OUT OF STOCK
Table set up for 2/3 station operation
-
OUT OF STOCK
Table set up for 2/3 station operation
-
OUT OF STOCK
Refurbished by Van Dorn in 2012 44mm screw installed 2014 -
OUT OF STOCK
External Hyd system
Electric Machine -
OUT OF STOCK
Min shut height: 39.37"
Max shut height: 108.27" -
OUT OF STOCK
Low Hours -
OUT OF STOCK
Clamp Style: Vertical Rotary Rotary Stations: 2 Table Size: 77" Screw Diameter: 55 mm Max Injection Pressure: 2500 psi Injection Rate: 13.68 in3/sec Barrel/Screw Condition: Good Screw Stroke: 9.84"
-
OUT OF STOCK
- New Ram Seals
- New controller (like Mosaic)
-
OUT OF STOCK
Robot interface Min-Max Mold Height 7.9-25.6 Wide Platen -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9" x 25.6" -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9" x 25.6" -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9"/25.6" -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Hydraulic and air valve/mold gates -
Barrel & Screw condition: Excellent. ** NEW -
Converted to 3500 ton Control upgrade to VDU2 145 mm Screw High Pressure Injection Unit -
OUT OF STOCK
3 Machines Available Upgrades: Sailor Takeout Arm, Model OE-2577 -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Wittmann Robot Available
Low Hours
Shot size: .38-1.52 oz., .67-2.68 oz.
