Min/Max Shut Height: 13.8"/41.3"
Clamp Stroke: 46.25"
Ejector Stroke: 9.8"
Screw Diameter: (A) 60mm (B) 50mm
L/D Ratio: (A) 23.6:1 (B) 24.3:1
Max Plastic psi: (A) 29841 (B) 30668
-
OUT OF STOCK
Remak Robot Screw with vented barrel, electric screw drive Baumuller Bum64, 5 Cores, 6 cascade control hydraulic with 2 position valves, 4-10 out water manifold, 1 slide monitoring input, 8 mold heaters -
OUT OF STOCK
- Remak Robot
- Screw with vented barrel
- Electric screw drive Baumuller Bum64
- 5 Cores
- 6 cascade control hydraulic with 2 position valves
- 4-10 out water manifold
- 1 slide monitoring input
- 8 mold heaters
- Screw Diameter: 95 mm
-
OUT OF STOCK
8 Mold Heater Zone
-
OUT OF STOCK
- Minimum Daylight: 5.9"
- Screw Diameter: 30 mm
- X MELT High Speed Filling Equipment
- Full Load Amps: 85 amps
-
OUT OF STOCK
Wittmann Robot Available
Low Hours
Shot size: .38-1.52 oz., .67-2.68 oz. -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
3 Machines Available Upgrades: Sailor Takeout Arm, Model OE-2577 -
Converted to 3500 ton Control upgrade to VDU2 145 mm Screw High Pressure Injection Unit -
Barrel & Screw condition: Excellent. ** NEW -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Hydraulic and air valve/mold gates -
OUT OF STOCK
Robot interface Min-Max Mold Height 7.9-25.6 Wide Platen -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9" x 25.6" -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9" x 25.6" -
OUT OF STOCK
Robot Interface
Min/Max Mold Height: 7.9"/25.6" -
OUT OF STOCK
- New Ram Seals
- New controller (like Mosaic)
-
OUT OF STOCK
Clamp Style: Vertical Rotary Rotary Stations: 2 Table Size: 77" Screw Diameter: 55 mm Max Injection Pressure: 2500 psi Injection Rate: 13.68 in3/sec Barrel/Screw Condition: Good Screw Stroke: 9.84"
-
OUT OF STOCK
Low Hours -
OUT OF STOCK
Min shut height: 39.37"
Max shut height: 108.27" -
OUT OF STOCK
External Hyd system
Electric Machine -
OUT OF STOCK
Refurbished by Van Dorn in 2012 44mm screw installed 2014 -
OUT OF STOCK
Table set up for 2/3 station operation -
OUT OF STOCK
Table set up for 2/3 station operation
-
OUT OF STOCK
Star Robot: Model TWS-1700 FEC
Hydraulic Mold Clamps
Valve Gate Controls -
OUT OF STOCK
- Low Hours
- Ejector plate + hydraulic ejector
- 6 mold nozzles
- 4 cores
- 4 mold cavity pressure transducers
- 65 lbs payload BOSCH controlled servo-robot
- Height of Center Mold: 70.87"
- Screw Diameter: 4.72"
